AMI Aptio V4.6.4.0 R1.14.0 for D3061-A/B D3062-A/B
05.08.2011
Important note: For updating the BIOS to Rev. 1.14.0 at least BIOS R1.11.0 must be installed, otherwise “normal” BIOS update will fail. BIOS update via Recovery Flash is working.
BIOS Rev. 1.14.0:
List of changes
- Defined system boot order now depends on SATA port, so connecting another boot device at same SATA port has no effect on system boot order.
- Handling of BIOS setup item “Boot Removable Media: Enabled / Disabled” improved.
- HDD password mechanism improved concerning PowerOn via Wake on LAN (WoL) and Power Failure Recovery.
- Parameter “Never” of BIOS Setup item “User Password on Boot” renamed to “Disabled”.
- CPU power management default value changed (CPU C3 state re-enabled).
- Power Failure Recovery mechanism now working if power fails during POST.
- Hide BIOS Setup node “ME Subsystem: Enabled / Disabled”.
- Bug Fix: OEM Activation 3.0 (OA3.0) not working with some customer data.
Known problems and restrictions
- RAID Migration to RAID 1 from a non RAID system with 2 HDDs with Windows XP doesn't work properly
- SoL not working properly
- USB Port Security not working properly.
- When clearing passwords (Administrator/User Password), passwords are not cleared if afterwards "Optimized Defaults" are loaded