D2991-A1 BIOS R1.8.0
Previous released BIOS version: R1.7.0
BIOS Rev. 1.8.0:
List of changes
- Support for customized BIOS Boot logo added
-
Corrected SMBIOS type 17 DIMM information
-
Added OEM Activation 3.0 (OA3.0) support
-
Added new selectable value (512 MB) for maximum IGD memory in BIOS setup
-
Implemented new PXE ROM version
-
Updated CPU microcode
-
BIOS boot order now depends on SATA port. Therefore connecting another boot device at same SATA port has no effect on system boot order
-
System monitoring parameters updated
-
Improved HDD password behaviour in combination with power failure recovery and wake on LAN (WoL)
-
BIOS user password now only can be defined when an admin password is configured
-
Implemented support for user password on boot and HDD password on boot for each HDD
-
Corrected SMBIOS type 1 wake cause
-
Updated EFIFLASH.EXE to R1.4.0
Known problems and restrictions
-
BIOS Setup item "Power Failure Recovery: Disabled" not working correctly if "Low Power Soft Off” = Enabled
-
With BIOS setting “IGD Memory: Disable” and no additional plugged graphic card no picture is shown. Workaround: Plug password skip jumper to load BIOS defaults
- USB Port Security not working properly