Fujitsu D3003-Sx, BIOS 1.21.0 SR1
BIOS 1.21.0 SR1
Changes:
-
Fixed: Removed error message on COM1 in case of boot with no keyboard
-
Fixed: Removed event log entry in case of boot with no keyboard
-
Fixed: Cannot boot from USB when when SATA is set to RAID mode
-
Fixed: mSATA not available when SATA is set to native IDE mode
-
D3003-S1 / D3003-S3: Changed access level for several LVDS options from user to admin
Known issues / limitations D3003-S
(based on latest released BIOS R1.18.0 and current Service Release BIOS R1.21.0.SR1)
-
D3003-S1x/S3x: Depending on RAM configuration, you may see washed out colors on LVDS displays.
This can be fixed by BIOS Setup options:
Advanced - GFX Configuration - UMA Frame Buffer - Change from "Auto" to "forced"
Advanced - GFX Configuration - UMA Frame Buffer Size - leave at Default 256MB
-
Even though "No halt on any error" is set, SMART errors still result in halt during BIOS POST:
This is a limitation and will not be fixed!
-
No beep error code when no RAM is plugged
This is a limitation and will not be fixed!