Produktgruppe
SP Prodit mITX Basis 3003-S2 active cooling











Gehäuse
-
Formfaktor mITX
Prozessor und Chipsatz
-
Prozessor AMD FT1 Mobile T56N 1,6GHz
-
Chipsatz AMD Embedded G-Series / A55E FCH Chipsatz
Speicher, Laufwerke
-
4GB DDR3 2x2GB
-
WD5000BPVT 500GB SATA 2½"
Grafik
-
ATI Radeon X6350 (Max. Auflösung 2560 x 1600)
-
DirectX11 Support
-
DisplayPort
LAN
-
2x Realtek 10/100/1000 MBit/s
Audio
-
Realtek ALC262, 2 Kanal High-Definition Audio
Abmessung, Gewicht, Garantie
-
Maße (B x H x T): 250 x 52 x 191
-
Gewicht: ca. 2,5 kg
Betriebssystem und Software
-
ohne Betriebssystem
-
FreeDOS
-
Linux
AMI UEFI BIOS
Modifiziert und angepasst von Fujitsu Technology Solutions; Recovery BIOS, SM-BIOS (DMI), BIOS Update via USB, Quick Boot, Logo Boot, Quiet Boot, Plug & Play, automatische DRAM und PCI Konfiguration, S.M.A.R.T. Support, Advanced Power Management, ACPI S3 / S4 (Save-to-RAM / Save-to-Disk), Wake on time from S5; Konfigurierbarer LVDS support; EraseDisk
Security Features
Recovery BIOS, System und BIOS Password, Boot Sequence Control für jedes Laufwerk, Serial Port Access Protection, TPM 1.2 (Infineon), Boot Sector Virus Warnung, Schreibschutz für Flash BIOS, Harddisk Password inkl. “Silent Password” option (keine Keyboard-Eingabe erforderlich)
Special Features
Silent Fan
Temperaturabhängige, Betriebssystem unbhängige Prozessor- und System-Lüfter Überwachung und Kontrolle
System Guard
Anzeige und Einstellung von Silent Fan Features
Silent Drive
Geräuschreduzierung von optischen Laufwerken und Festplatten
Recovery BIOS
Stellt ein beschädigtes BIOS wieder her
Desk Update
Einfacher Treiber-Update von Driver&Utilities DVD
Multi Boot
Konfortables Booten von jedem Boot-device
Designed für industrielle Anwendung
Langlebige Komponenten für 24 / 7 Einsatz in industriellen Anwendungen
Revisions-Kontrolle & Extended Lifetime (bis zu 5 Jahre)
Erweiterte Betriebstemperatur (bis zu 60°C
Optionales Zubehör
-
2.5“ Festplatte SATA III (6GB/s)
-
mSATA SSD Festplatte 2-80GB
-
Intrusion-Logic (Überwachung des Öffnens des Gehäuses)
-
Diebstahlschutz mittels Kensington-Lock
-
USB WLAN Modul
-
PCI Riser-Karte
-
Standfüße für vertikales Aufstellen
-
Kabel zum Anschluss der 2. seriellen Schnittstelle (onboard)
-
VESA Montage Satz zum Anbau an Monitore



