Lexika
Fujitsu D3230-B, D3240-B, BIOS R1.20
BIOS Rev. 1.20.0:
List of changes
- Bug Fix: System Monitoring data updated
- Previous BIOS versions could result in early processor throttling @ high load due to insufficient processor fan speed
- Bug Fix: POST hangs with some PCIe adapters using BIOS Setup setting
- “Secure Boot Control: Enabled” (at “Security – Secure Boot” submenu).
- EraseDisk feature updated to support secure deletion of SSDs.
- Fujitsu TFTP server address for feature “Auto BIOS Update” changed from IP addressing to domain naming.
- BIOS Setup value for item “Aggressive LPM Support” (at “Advanced – SATA Configuration” submenu) changed to “Enabled” and greyed-out.
- POST and BIOS Setup copyright message updated to year 2014.
Known problems and restrictions
- Update to BIOS ≥ R1.17.0 is only possible if BIOS ≥ R1.14.0 is installed first
- If BIOS ≥ R1.17.0 is installed, BIOS downgrade to BIOS version R1.14.0 or below is NOT possible
- Depending on installed driver version of “Intel(R) Management Engine Interface” a BlueScreen may occur during BIOS update at Windows. Don’t use driver version v9.5.14.1724!
- USB3.0 memory stick sporadically not detected via USB legacy support during POST when connected to USB3.0 port.
- Running VirtualXP crashes during resume from ACPI S3 or ACPI S4.
- After starting BIOS update the process may stay approximately 70 seconds with 0% / 1% before continuing. Please wait and do not switch off the system during BIOS update!
- When clearing passwords (Administrator/User Password), passwords are not cleared when afterwards "Optimized Defaults" were loaded.
- BIOS Setup item "Power Failure Recovery: Disabled" not working as expected with "Low Power Soft Off: Enabled".